Single post
4_Trumpet_150_psi_3L_Air_Compressor_150dB_Train_Air_Horn_Kit_For_Car_Truck_01_ztzv

4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck

4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck

4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
A full train horn system, ready to install. At the heart of this package is the intense quad trumpet air horn, drawing immediate attention. Black color, made entirely of metal for maximum protection against all weather conditions. This system includes a 0.8 Gallon air tank, 150 PSI 12 volt air compressor, pressure gauge, pressure switch, hose, fittings and mounting hardware. Ideal for all vehicles with a 12V system. A bold, loud choice. Because the compressor is integrated with the tank, the air connection and electrical wiring to the pressure switch is already done, making installation easier and faster. 4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck. Trumpets Size:6.5″/9.06″/11.61″/13.78″3.54 165/230/295/350×90(dia)mm. Operation Air:29-116 PSI(0.2Mpa-0.8Mpa). Material:Chrome plated zinc alloy. One-piece Tank Compressor System. Size:15.35″x5.51″x7.09390(L)×140(W)×180(H)mm. Max Working Pressure:150 PSI. Tank Capacity:0.8GAL(3L). Pressure Switch Setting:90 PSI on, 115 PSI off. Flow Rate (0 PSI):1.17. Designed for any high-pressure air horns that require on-board air system. Thermal Overload Protection (Will automatically shut off when air compressor goes over 176F and restart when it cool down to 158F). Included in this kit. 1x Quad/4 Trumpets Train Air Horn (Chrome Plated Trumpets with Black Painted Base). 12V Electric Air Valve (Solenoid) with Compression Fitting. 1x All-in-one Compressor & Tank. 1x Pressure Switch & Pressure Gauge & Air Fiittings Pre-installed. Do not attempt to disassemble, repair or customize this product. Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water. Never leave this product unattended during use. Intended for use by adults only. During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot during such periods. Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others. Avoid use of product near flames, explosive materials, aerosol products or oxygen devices. Be sure to pump nothing other than atmospheric air. It is important to determine the maximum air pressure for any tool or attachment before using it. Air sprayer or nozzle should always be pointed away from any part of the body. The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. Make sure your battery ground is detached before you begin. Set the horn up for use only in areas with adequate ventilation. Employ equipment for eye protection during drilling operations. Ensure that your air system has no pressure before you begin. The specific voltage requirement for this horn system is 12 volt DC, therefore installation must be done to a DC power source of 12 volts. Before beginning the installation, determine each component’s spot. Confirm you have the proper length of airline and wire. Power wire to on-board air system should be kept short. To power up the on-board air system, make sure you use a 12-gauge wire or thicker. Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to shaking. Never attach the horn to any plastic or other flexible material. Mark the spots for the holes with the bracket and then drill. The mounting hardware should be used to fasten the horn. On one side of the included 1/4 OD air line, attach the compression nut and force the air line upon the male inlet fitting which is found on the electric solenoid valve. Pass the brass nut through the inlet fitting and fasten. Take the air line’s other side and place the compression nut of the air tank fitting on it. Force the air line onto the male fitting of the tank and then fasten the compression nut. WARNING: Avoid over tightening. ON-BOARD AIR SYSTEM MOUNTING. Determine a dry place to mount your on-board air system. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around. Compressor and also to avoid heat from the exhaust. IMPORTANT: Never attach the system to any plastic or other flexible material. For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed. Avoid placing compressor near flammable liquids. For proper heat dissipation of the compressor never install the on-board air system upside down. Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the system is secured. When the air pressure in the air tank is below the preset ON pressure (90 PSI), the compressor will automatically turn on and will start pumping air into the tank. When the pressure reaches the cut OFF pressure (115 PSI), the compressor will be automatically shut off. In this system your Pressure Switch is already wired to the air compressor. Do not modify this connection. Your system includes a 150 PSI Pressure Gauge that will measure the air pressure of the tank. The air pressure gauge is a sensitive part of the system, please avoid dropping, hitting or tighten it to the tank. Using a method other than the brass nut located in the back. This nut helps you drain the water that can collect in the air tank after long periods of use. REMOVING CONDENSATION:To remove any condensation which has accumulated inside the tank, bleed the tank’s pressure until it ranges from approximately 5 PSI to 20 PSI. Remove the drain nut found at the tank’s bottom to drain the water from the tank. After draining the accumulated condensation, apply thread sealant to the nut’s thread and reinstall it. IMPORTANT: Draining the system regularly will extend the life of the air tank. The red wire of the on-board system coming from the bottom of the tank should be connected using the provided fuse to (+) 12-volt power source. IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on. Recommended connection points are: windshield wiper motor, blower motor or an accessory terminal on the fuse panel. Make sure to use wire that is as heavy as the wire of the compressor. The black wire of the on-board system coming from the bottom of the tank should be connected to ground. The ground connection should be rust and paint free. Your compressor is now set for use and will turn on automatically when air pressure in the air tank falls. When air pressure reaches maximum PSI, it will turn off. If the compressor fails to reach the maximum air pressure of the tank, which is the Pressure Switch’s cut OFF pressure, check all air connections for leaks. While the compressor is pumping, use soapy water or any bubble solution to perform this check. In case the leak remains after tightening, re-apply thread sealant. IMPORTANT: Never touch fittings, connecting tubes or the air compressor with bare hands either during or shortly after use. USING NEW HORN BUTTON. Connect one of the electric valve’s wires to the positive (+) terminal of the battery, alternator, etc. This circuit should be protected using a 10A fuse (not provided). Connect the second electric valve wire to one of the Horn Button’s connections. The remaining connection of the Horn Button must be connected to ground. USING VEHICLE’S HORN SWITCH. First, determine the switch’s polarity. The horn of most vehicles sends a negative (-) signal which can be confirmed by connecting one of the probes from an ohm meter to the wire of the horn while connecting the other one to ground. The meter should be at zero. This proves that horn circuit is negative (-). In case the meter reads anything other than zero ohms, test for voltage between the wire of the horn and the ground. A 12-volt reading would mean a positive (+) horn circuit. Once you know the horn circuit’s polarity, connect any of the solenoid wires to the horn wire. If you have a negative horn circuit, connect the remaining solenoid wire to a constant 12-volt power source. If you have a positive horn circuit, connect the remaining solenoid wire to ground. SOLUTIONS TO COMMON ISSUES. Solution 1: Check all switches to make sure they are ON. Solution 2: Check the fuse; if blown, disconnect compressor from power and replace the fuse. Solution 3: Allow compressor to cool off for 30-60 minutes. Solution 4: Check pressure switch, replace if damaged or inoperable. Issue: Air horn is inaudible. Solution 2: Assure air tank is pressurized. Solution 3: Check the fuse; if blown, disconnect compressor from power and replace the fuse. Solution 4: Examine electrical connection for damage or corrosion, secure electrical connections. Issue: Excessive moisture in horn. Solution 1: Depressurize and drain the tank. Solution 2: Relocate the on-board air system to a drier location. Issue: Continual cutting-off of Thermal overload protection. Solution 1: Relocate the on-board air system to a drier, cooler location. Solution 2: Replace the compressor. Issue: Excessive vibration or noise. Solution 1: Tighten system components. Issue: Loss of pressure of tank when compressor is shut off. Solution 1: Tighten drain cock. Solution 2: Examine air and check valves and replace if damaged or leaking. Solution 3: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Issue: Compressor runs continuously and has low air flow. Solution 1: Decrease the frequency of use. Solution 2: Use soap and water solution on air connections, and tighten connections or repair leaks where needed. Solution 3: Clean or replace the air filter element if it is clogged. Solution 4: Replace compressor. Air Compressor & Air Tank. 90 PSI on, 115 PSI off. 15.35″x5.51″x7.09390(L)×140(W)×180(H)mm. Kit or Single Part. 18.5″x 17″x 9. International Buyers C Please Note. These charges are the buyers responsibility. Q: How do I return an item? Please contact our customer service before you return an item. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. Key or key case. Cylinder Piston Gasket Kit. Cylinder Head Gasket Sets. UTV & ATV Brake System Parts. Kevlar Carbon Brake Pads. Brake Rotors and Pads. Nerf Bars & Running Boards. Mass Air Flow Sensor-MAF. Electrical & Test Equipment. ATV Rear Wheel Axle. ABS Wheel Speed Sensor. Idle air control valve. Transfer Case Shift Motor. Secondary Air Injection Pump. Spark Plug Ignition Wire. Air Cleaner Filter Box. Cold Air Intake Kit. Oil Catch Can Tank. Fuel Shut Off Solenoid. Air Ride Suspension Valves. ATV Brake Master Cylinder. Rotary Vane Vacuum Pump. Throttle Cable Carb Bracket. Oil Fuel Hose Line. LED 3RD Brake Light. Wheel Stem Air Valve Cap. Splash Guards & Mud Flaps. Light Bar Mount Bracket. Other Golf Cart Parts. Recoil Starter Pull Start. 4 pcs wheel hub bearing. Tire Inflator Air Pump. Brake Line Lock Kit. Other Handlebars & Levers. Brake Line Tubing Kit. Kick Start Starter Lever. Car Window Film Tint Tools. Lower Kits & Parts. Shift Knobs & Boots. 2X Front Wheel Hub & Bearing Assembly For Chevrolet Impala Pontiac Grand Prix. 2 Front Hood Lift Supports Struts Shocks For Dodge Ram 1500 2500 3500 4500 5500. 2X Uncut Replacement Key Fob Keyless Entry Remote Transmitter for dodge charger. For Ford F-150 Expedition 5.4L 4.6L Explorer Lincoln DG508 Ignition Coil 8 Pack. 2 Front Hood Gas Lift Supports Strut Shocks Spring For Dodge Ram 02 -10 4364. Set 2 Rear ABS Wheel Sensor Driver & Passenger For 03 04 05-08 For Infiniti FX35. Pair Rear ABS Wheel Speed Sensor Driver & Passenger For Chrysler Voyager 01-03. Pair 2 Front Left (LH Sise) ABS Wheel Speed Sensor Fits 02-07 Fits Jeep Liberty. 4x For IS250 IS350 ISF Sedan 06 – 11 12 car rain guard vent window visor. The item “4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck” is in sale since Sunday, December 22, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Steering Wheels & Horns”. The seller is “topcn-autoparts” and is located in Ontario, California. This item can be shipped to United States.
  • UPC: Does not apply
  • Brand: topcn-autoparts
  • Manufacturer Part Number: TOP10808301CN
  • Type: Horn
  • Horn Type: Train
  • Features: Quick Release
  • Material: Metal
  • Color: Black
  • Placement on Vehicle: Left
  • Fitment Type: Direct Replacement
  • Mounting Hardware Included: Yes
  • Warranty: 1 Year
  • Custom Bundle: No
  • Modified Item: No
  • Surface Finish: ZINC
  • Interchange Part Number: Air Horn
  • Other Part Number: Air Compressor & Air Tank
  • Superseded Part Number: Quad/4 Trumpets
  • DB Output: 150 DB
  • Pressure Switch Settings: 90 PSI on, 115 PSI off
  • Max Pressure: 150PSI
  • Max Amp: 23.0A
  • Diameter: 4″/90mm
  • Trumpets Length: 6.5″/9.”/12″/14″ (165/230/295/350mm)
  • Tank Size: 15.35″x5.51″x7.09″390(L)×140(W)×180(H)mm
  • Tube Length: 16″(5m
  • Gross Weight: 15 lb
  • Duty cycle: 15%
  • Kit or Single Part: Kit
  • Tank capacity: 3 Liters0.8GAL)
  • Voltage: 12V
  • Package Size: 18.5″x 17″x 9″

4 Trumpet 150 psi 3L Air Compressor 150dB Train Air Horn Kit For Car Truck
theme by teslathemes